TL AWD V6-3.7L (2010)
Rear Door Window Regulator: Service and Repair
Rear Door Glass and Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the door panel See: Rear Door Panel/Service and Repair/Rear Door Panel Removal/Installation.
2. Raise the glass fully.
3. Remove the screws, then remove the door panel bracket (A).
4. Remove the plastic cover (A).
1. Disconnect the power door lock actuator connector (B), and detach the harness clip (C).
2. Remove the plug caps (D).
3. Pass the wire harness (E) through the slits (F) in the plastic cover (G), then remove the cover.
NOTE: If the plastic cover is damaged or torn, replace it with a new one.