TL AWD V6-3.7L (2010)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Interior Trim Removal/Installation - Trunk Area
Interior Trim Removal/Installation - Trunk Area
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim or the panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove the trunk floor (A).
2. Remove the tool box spacer (A).
3. Remove the trunk lid weatherstrip near the trunk rear trim panel See: Trunk / Liftgate Weatherstrip/Service and Repair.
4. Detach the clips, and release the hooks (A) and the tabs (B) by pulling up the trunk rear trim panel (C), then remove the panel.
