TL AWD V6-3.7L (2010)
Subframe: Service and Repair
Subframe Replacement
Special Tools Required
-
Subframe Alignment Pin 070AG-SJAA10S
Front Subframe Torque
If you remove the mounting bolts for any of the following items, always replace the bolts with new ones:
-
Front subframe
-
Front subframe middle rubber mount
-
Front subframe front stiffener
-
Front subframe rear stiffener
-
Rear engine mounting base bracket
Front Subframe Alignment
NOTE: Align the front subframe with the subframe alignment pin.
1. Align the front subframe (A) in the following sequence.
1. Lift the front subframe up to the body, and loosely install the new subframe mounting bolts (B), the front stiffener mounting bolts (C), the new
rear stiffener mounting bolts (D) and the stiffeners (E).