TL AWD V6-3.7L (2010)
Disconnecting System Connectors
1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode. Do the battery terminal disconnection
procedure See: Starting and Charging/Battery/Service and Repair/Procedures, then wait at least 3 minutes.
Driver's Airbag
2. Remove the access panel (A) from the steering wheel, then disconnect the driver's airbag 4P connector (B) from the cable reel 4P connector.
Front Passenger's Airbag
3. Remove the glove box See: Glove Compartment/Service and Repair/Glove Box Removal/Installation, then disconnect the dashboard wire harness
4P connector (A) from the front passenger's airbag 4P connector.
Side Airbag
4. Disconnect the SRS floor wire harness 2P connectors (A) from the driver's and the front passenger's side airbag 2P connectors.