TL AWD V6-3.7L (2010)
Scuff Plate: Service and Repair
Interior Trim Removal/Installation - Door Areas
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program
Front Door Sill Area
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim or the panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Release the hooks (A) from the kick panel (B) and the B-pillar lower trim (C), and pull up the front door sill trim (D) by hand to detach the clips
(E), then remove the trim.
2. If necessary, pull up the front side outer trim (F) to detach the clips (G), then remove the trim.
3. Remove the kick panels (A).
1. Pull out the door opening seal (B) as needed from the kick panel hooks (C).
2. Pull back the kick panel by hand to detach the clips, then remove it.
