TL AWD V6-3.7L (2010)
Sun Visor: Service and Repair
Sunvisor Removal/Installation
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to damage the sunvisor or the headliner.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Insert a flat-tip screwdriver through the hole in the front side of the bracket cover (A), and push the hook (B). Make sure the hook is unlocked.
2. While pushing in the hook (A) with a flat-tip screwdriver, release the sunvisor (B) from the holder (C), and rotate the sunvisor backward about 45
°. Make sure the hook slides into the bracket cover as you rotate the sunvisor.
3. Pull down the sunvisor (A) to release the pin (B) and the bracket (C) from the holes in the body. Then pull out the vanity mirror light connector
(D), and disconnect it.
