TL AWD V6-3.7L (2010)
Splash Guard: Service and Repair
Front Strake Replacement
Front Strake Replacement
NOTE:
-
Take care not to scratch the body.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Remove the bolts and detach the clip. Release the front strake (A) from the front air guide plate (B), then remove the front strake.
2. Install the strake in the reverse order of removal, and note these items:
-
If the clip is damaged or stress-whitened, replace it with a new one.
-
Push the clip into place securely.
