TL AWD V6-3.7L (2010)
Splash Guard: Service and Repair
Fuel Pipe Protector Replacement
Fuel Pipe Protector Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the body.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Remove the left rear wheel See: Steering and Suspension/Suspension/Rear Knuckle Alignment Link/Service and Repair.
2. Detach the clips, then remove the fuel pipe protector (A).
3. Install the protector in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.