TL AWD V6-3.7L (2010)
5. Pull up the door glass outer weatherstrip (A), then remove the weatherstrip.
6. If the clips are damaged or stress-whitened, replace them with new ones.
7. Before installing the door glass outer weatherstrip, slide the clips to the released position as in step 4.
8. Install the door glass outer weatherstrip, and slide the clips securely on to the flanges.
9. Reinstall all remaining removed parts and note these items:
-
When reinstalling the door panel, make sure the plastic cover on the door is installed properly and sealed around its outside perimeter to seal
out water.
-
Check for water leaks See: Doors, Hood and Trunk/Doors/Front Door/Front Door Window Glass/Adjustments.
