TL AWD V6-3.7L (2010)
Brake Rotor/Disc: Service and Repair
Rear Brake Disc Replacement
Rear Brake Disc Replacement
NOTE: Keep any grease off the brake disc/drum and the brake pads.
1. Raise and support the vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
2. Remove the rear wheel.
3. Release the parking brake lever fully.
4. Remove the brake hose mounting bolt (A).
5. Remove the brake caliper bracket mounting bolts (B), then remove the caliper assembly (C) from the knuckle. To prevent damage to the caliper
assembly or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage. Do not twist the brake hose excessively.
NOTE: Make sure the washers (D) are in position on reassembly, if they are removed See: Steering and Suspension/Suspension/Rear Knuckle
Alignment Link/Service and Repair.
6. Remove the brake disc/drum flathead screws (A).
