Front Brake Disc Replacement for TL AWD V6-37L (2010)
7. Remove the brake disc/drum (B) from the hub bearing unit.
NOTE:
-
Remove the access plug (C), then if necessary, turn the adjuster nut (D) with a flat-tip screwdriver until the shoes become loose.
-
If the brake disc/drum is stuck to the hub bearing unit, thread two 8 x 1.25 mm bolts (E) into the brake disc/drum to push it away from the
hub bearing unit. Turn each bolt 90 degrees at a time to prevent the brake disc/drum from binding.
8. Install the brake disc/drum in the reverse order of removal, and note these items:
-
Before installing the brake disc/drum, clean the mating surfaces between the hub bearing unit and the inside of the brake disc/drum.
-
Adjust the parking brake See: Parking Brake System/Adjustments.
9. Inspect the brake disc runout See: Testing and Inspection/Rear Brake Disc Inspection.
10. Clean the mating surfaces between the brake disc/drum and the inside of the wheel, then install the rear wheel.
