TL AWD V6-3.7L (2010)
Radiator: Service and Repair
Radiator and A/C Condenser Fan, Motor, and Shroud Removal and Installation
Radiator and A/C Condenser Fan, Motor, and Shroud Removal and Installation
Removal
1. Remove the engine compartment covers See: Engine/Access Cover/Service and Repair.
2. Do the battery removal procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.
3. Remove the battery base See: Engine/Service and Repair/Engine Removal.
4. Remove the air intake duct splash separator See: Engine/Service and Repair/Engine Removal.
5. Raise the vehicle on the lift.
6. Remove the splash shield See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement.
7. Disconnect the A/C condenser fan motor connector (A), and remove the harness clamp (B).
8. Loosen the A/C condenser fan shroud mounting bolts (C).
9. Disconnect the radiator fan motor connector (A), and remove the harness clamps (B).
10. Lower the vehicle on the lift.
11. Remove the coolant reservoir (A), then remove the A/C condenser fan shroud assembly (B).
