TL AWD V6-3.7L (2010)
7. Tighten the A/C condenser fan shroud mounting bolts (A).
8. Connect the A/C condenser fan motor connector (B), and install the harness clamp (C).
9. Install the splash shield See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement.
10. Lower the vehicle on the lift.
11. Install the air intake duct splash separator See: Engine/Service and Repair/Engine Installation.
12. Install the battery base See: Engine/Service and Repair/Engine Installation.
13. Do the battery installation procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.
14. Install the engine compartment covers See: Engine/Access Cover/Service and Repair.
