TL AWD V6-3.7L (2010)
13. Install the harness (B) to the upper cover.
14. Connect the breather hose (C) and install the harness clamp (D).
15. Reconnect the three injector connectors (E) and the two harness clamps (F).
16. Install the harness holder mounting bolts (G) and engine ground cable (H).
17. Install the three ignition coils to the rear cylinder head See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair.
18. Install the intake manifold See: Intake Manifold/Service and Repair/Intake Manifold Removal/Installation.
19. Install the strut brace See: Body and Frame/Frame/Structural Brace/Service and Repair.