TL AWD V6-3.7L (2010)
Go to the immobilizer system's troubleshooting; without keyless access See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing
and Inspection/Symptom Related Diagnostic Procedures/Immobilizer System Symptom Troubleshooting Information (Without Keyless Access System),
with keyless access See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Testing and Inspection/Symptom Related
Diagnostic Procedures/Keyless Access System Symptom Troubleshooting Information.
NO -
Go to step 21.
17. Press the engine start/stop button to select the OFF mode.
18. Press the engine start/stop button to select the ON mode, and watch the keyless access indicator.
Does the keyless access indicator stay on?
YES -
Go to the keyless access system general troubleshooting information See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Keyless
Entry/Testing and Inspection/Initial Inspection and Diagnostic Overview.
NO -
Go to step 21.
19. Do the gauge self-diagnostic function See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Testing and
Inspection/Initial Inspection and Diagnostic Overview.
20. Check the gauge display.
Is B-CAN------ERROR indicated?
YES -
Check for B-CAN system DTC's See: Information Bus/Testing and Inspection/Component Tests and General Diagnostics/Troubleshooting - B-CAN
System Diagnosis Test Mode 1 and Test Mode 2 (Without the HDS).
NO -
Go to step 21.
21. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
22. Disconnect the HDS from the DLC.
23. Check for continuity between DLC terminal No. 7 and body ground (with keyless access; between body ground and DLC terminals No. 1 and No.
7 individually).