TL AWD V6-3.7L (2010)
Air Bag: Removal and Replacement
Side Curtain Airbag Replacement
Side Curtain Airbag Replacement
Removal
NOTE:
-
If replacing the side curtain airbag after deployment, refer to Component Replacement/Inspection After Deployment See: Service and Repair for
a complete list of other parts that must also be replaced.
-
Review the interior trim replacement procedure before doing repair or service See: Body and Frame/Interior Moulding / Trim/Locations.
-
Removal of the side curtain airbag must be done according to Precaution and Procedures See: Air Bag(s) Arming and Disarming/Service and
Repair.
1. Do the battery terminal disconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures, then wait at least 3 minutes
before starting work.
2. Remove the headliner See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair.
3. Disconnect the SRS floor wire harness 2P connector (A) from the side curtain airbag 2P connector.
4. Remove the mounting bolts (A) and bolts (B) from the bracket. Detach the clips (C), then remove the side curtain airbag (D).
