TL AWD V6-3.7L (2010)
Seat Belt: Service and Repair
Front Seat Belt Replacement
Front Seat Belt Replacement
Front Seat Belt
SRS components are located in this area. Review the SRS component locations See: Air Bag Systems/Locations and the precautions and procedures
See: Air Bag(s) Arming and Disarming/Service and Repair before doing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care no to scratch the body or tear the seat covers.
-
Check the front seat belts for damage See: Testing and Inspection, and replace them if necessary.
-
If replacing the front seat belts after deployment, refer to Component Replacement/Inspection After Deployment See: Air Bag Systems/Service
and Repair for a complete list of other parts that must also be replaced.
1. Slide the front seat all the way forward. Carefully pry up on the bottom of the anchor cover (A) at the pry point (B) with the appropriate trim tool
to release the hooks (C) and the tab (D), then remove the cover by pulling it upward. The driver's seat is shown; the passenger's seat is similar.
2. Remove the lower anchor bolt (A).