TL AWD V6-3.7L (2010)
3. Do the battery terminal disconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures, then wait at least 3 minutes
before beginning work.
4. Remove the B-pillar upper/lower trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Interior Trim
Removal/Installation - Pillar Areas.
5. Remove the upper anchor bolt (A).
6. Disconnect the seat belt tensioner connector (A). Remove the upper retractor mounting bolt (B) and the lower retractor bolt (C), then remove the
front seat belt (D) and the retractor (E).