TL AWD V6-3.7L (2010)
5. Remove the upper anchor bolt (A).
6. Loosen the retractor mounting bolt (A), and remove the retractor bolt (B), then remove the center seat belt (C) and the retractor (D).
7. Install the seat belt and buckles in the reverse order of removal, and note these items:
-
Check that the retractor locking mechanism functions as described See: Testing and Inspection.
-
Assemble the washer on the center anchor bolt as shown.
-
Before installing the center anchor bolt, make sure there are no twists or kinks in the center seat belt.
-
Tighten the bolts by hand first, then tighten to the specified torque.
