TL AWD V6-3.7L (2010)
Control Arm: Service and Repair
Rear Lower Arm A Replacement
Rear Lower Arm A Replacement
1. Raise and support the vehicle See: Wheels and Tires/Vehicle Lifting/Service and Repair.
2. Remove the rear wheel.
3. Remove the parking brake cable mounting bolt (B).
4. Remove the lower arm A mounting bolts, then remove lower arm A.
NOTE: Use new mounting bolts during reassembly.
5. Install lower arm A in the reverse order of removal, and note these items:
-
First install all of the components, and lightly tighten the bolts, then raise the suspension to load it with the vehicle's weight before fully
tightening to the specified torque.
-
Before installing the wheel, clean the mating surfaces on the brake disc/drum and the inside of the wheel.
6. Check the wheel alignment, and adjust it if necessary See: Alignment/Service and Repair.