TL AWD V6-3.7L (2010)
5. Loosely install the damper pinch bolt (E) into the damper fork.
6. Connect the damper fork and the lower arm with the new damper fork mounting bolt (F), then lightly tighten the new mounting nut (G).
7. Place a floor jack under the lower arm, and raise the suspension to load it with the vehicle's weight.
8. Tighten the damper pinch bolt and the damper fork mounting nut while holding the mounting bolt to the specified torque.
9. Tighten the damper mounting nuts and front strut brace mounting nuts on top of the damper to the specified torque.
10. Install the wheel speed sensor harness bracket (A).
11. Clean the mating surfaces of the brake disc and the inside of the wheel, then install the front wheel.
12. Check the wheel alignment, and adjust it if necessary See: Alignment/Service and Repair.