TL AWD V6-3.7L (2010)
Is there continuity?
YES -
Check the illumination control circuit in the gauge control module self-diagnostic function See: Instrument Panel, Gauges and Warning
Indicators/Instrument Cluster / Carrier/Testing and Inspection/Initial Inspection and Diagnostic Overview.
NO -
Repair open in the wire between cable reel 20P connector terminal No. 18 and gauge control module.
10. Disconnect the paddle shifter + (upshift switch) connector.
11. Check for continuity between paddle shifter + (upshift switch) connector terminals No. 1 and No. 2.
Is there continuity?
YES -
Replace the cable reel subharness See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Overhaul.
NO -
Replace the paddle shifter + (upshift switch) See: Service and Repair/Removal and Replacement/Paddle Shifter + (Upshift Switch) or Paddle Shifter -
(Downshift Switch) Replacement.