TL AWD V6-3.7L (2010)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Assembly Replacement
1. Remove the driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation.
2. Disconnect the clutch pedal position switch A connector (C) and the clutch pedal position switch B connector (D).
3. Pry out the lock pin (E), and pull the clevis pin (F) out of the clevis.
4. Remove the master cylinder mounting nuts (G) and the clutch pedal mounting bolt (H).
5. Remove the clutch pedal assembly (I).
6. Remove clutch pedal position switch A and clutch pedal position switch B.
7. Loosely install clutch pedal position switch A and clutch pedal position switch B.
