TL AWD V6-3.7L (2010)
8. Install the clutch pedal assembly (A).
9. Install the clutch pedal mounting bolt (B) and the master cylinder mounting nuts (C).
10. Apply multipurpose grease to the clevis pin (D), and the mating surfaces (E) of the clevis and the pedal. Slide the clevis pin into the clevis, then
install the lock pin (F).
11. Adjust the clutch pedal, clutch pedal position switch B, and clutch pedal position switch A See: Clutch Switch/Adjustments.
NOTE: Connect the switch connectors after adjusting them.
12. Check the clutch operation.
13. Reinstall the driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation.
