TL AWD V6-3.7L (2010)
7. Align the detent (D) of the release fork with the release fork bolt (E), then press the detent of the release fork over the release fork bolt squarely.
8. Install the release fork boot (F). Make sure the boot seals around the release fork and the clutch housing.
9. Move the release fork (A) right and left to make sure that it fits properly against the release bearing (B) and that the release bearing slides
smoothly. Wipe off any excess grease.
10. Install the transmission See: Manual Transmission/Transaxle/Service and Repair/Removal and Replacement/Manual Transmission Installation.
