TL AWD V6-3.7L (2010)
5. With the clutch pedal released, turn in clutch pedal position switch B until it contacts the clutch pedal.
6. Turn in clutch pedal position switch B an additional 3/4 to 1 turn. Make sure the clutch pedal height did not change.
7. While holding clutch pedal position switch B, tighten the locknut (C).
8. Loosen the clutch pedal position switch A locknut (B).
9. Fully press the clutch pedal to the floor, then release the clutch pedal 9-12 mm (0.35-0.47 in) and hold it there.
10. Adjust the position of clutch pedal position switch A so the engine starts with the clutch pedal in this position.
11. While holding clutch pedal position switch A, tighten the locknut.
12. Check the clutch operation.
13. Connect the clutch pedal position switch A connector and the clutch pedal position switch B connector, then check the cruise control and the
clutch pedal position switch operation.
