TL AWD V6-3.7L (2010)
Drive/Propeller Shaft: Service and Repair
Propeller Shaft Removal
Propeller Shaft Removal
1. Raise and support the vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
2. Remove exhaust pipe B and the muffler See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and Repair.
3. Place a transmission jack under the No. 2 propeller shaft.
4. Make reference marks (A) across the No. 1 propeller shaft (B) and the transfer companion flange (C).
5. Remove the flange nuts (D).
6. Make reference marks (A) across the No. 3 propeller shaft (B) and the rear differential companion flange (C).
7. Remove the flange bolts (D).
8. Remove the No. 1 and the No. 2 center support bearings mounting bolts.