TL AWD V6-3.7L (2010)
9. Remove exhaust pipe A.
-
Without SH-AWD See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and Repair
-
With SH-AWD See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and Repair
10. Left driveshaft: Pry the inboard joint (A) from the differential using a prybar. Remove the driveshaft (B) as an assembly.
NOTE:
-
Do not pull on the driveshaft, or the inboard joint may come apart. Pull the inboard joint straight out to avoid damaging the oil seal.
-
Be careful not to damage the oil seal or the end of the inboard joint using the prybar.
11. Right driveshaft: Drive the inboard joint (A) off of the intermediate shaft using a drift punch and a hammer. Remove the driveshaft (B) as an
assembly.
NOTE: Do not pull on the driveshaft, or the inboard joint may come apart.