TL AWD V6-3.7L (2010)
17. Remove the windshield.
18. Apply a light coat of glass primer to the windshield (A) along the edge of the windshield molding (B) and the rubber dams (C) as shown, then
lightly wipe it off with a gauze or a cheesecloth:
-
Apply glass primer to the molding.
-
Do not apply body primer to the windshield, and do not mix up the body and glass primer applicators.
-
Never touch the primed surfaces with your hands. If you do, the adhesive may not bond to the windshield properly, causing a leak after the
windshield is installed.
-
Keep water, dust, and abrasive materials away from the primed surfaces.