TL FWD V6-3.5L (2009)
14. Install the door panel in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Replace any damaged cable fasteners with new ones.
-
The latch cable (A) should be fixed to the cable fastener (B) with the latch in the unlocked position as shown.
-
Make sure the connectors are plugged in properly, and the cables are connected securely.
-
Make sure the window and power door lock operate properly.
-
Make sure the plastic cover on the door is installed properly and sealed around its outside perimeter to seal out water.