TL FWD V6-3.5L (2009)
7. Remove the door panel (A) with as little bending as possible to avoid creasing or breaking it.
-1 Start at the bottom edge of the door panel, release the clips (B) with a commercially available trim pad remover.
Detach the upper clips (C).
-3 Release the door panel from the metal clips (D) attached to the door glass inner weatherstrip.
Starting at the rear, pull the door panel out.
-4 NOTE: The inner handle cable (E) and the latch cable (F) are connected to the inner handle (G). Do not pull the door panel up too far, or these
cables will be damaged.
8. While holding the door panel (A) away from the door, detach the clips by pulling the inner handle (B) out, then remove the inner handle from the
door panel.
9. While holding the door panel (A) away from the door, disconnect the power window switch connector (B).
NOTE: If you are only removing the door panel, go to step 14. If you are doing further disassembly of the door panel, continue to step 10.