TL FWD V6-3.5L (2009)
Inner handle removal
10. Disconnect the inner handle cable (A) and the latch cable (B) from the inner handle (C), then remove the handle.
Detach the inner handle cable fasteners (D, E), then disconnect the inner handle cable from the cable fasteners.
-2 Detach the latch cable fastener (F), and remove the latch cable fastener (G) from the inner handle by pinching its tabs together.
NOTE: If the cable fasteners are damaged or stress-whitened, replace them with new ones.
Door end trim removal
11. Remove the screw (A), and detach the clips (B), then remove the door end trim (C) by pulling back the trim. The clips (D) will stay in the door.
NOTE:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Install the clips on the door end trim before installing the trim on the door.
Armrest assembly/grip assembly removal
12. Remove the armrest/grip assembly (A) from the door panel (B).
-1 Remove the screws from back of the door panel.
Pull out along the edge of the armrest/grip assembly to release the hooks (C).