acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Headliner|Service and Repair|Page 7687 > < Headliner|Service and Repair
Page 2
background image

-1 Remove the screws, then pull out the roof console by detaching the clips.

Disconnect the roof console connector (B), the moonroof switch connector (C), and the HFL microphone connector (D) (for some models), then remove
the roof console.

5. Remove the rearview mirror harness cover. Disconnect the connector from the rearview mirror, and release the wire harness from the rearview

mirror harness cover base.  See: Mirrors/Service and Repair/Rearview Mirror Harness Cover Base Replacement

6. Driver's side: Disconnect the roof wire harness connector (A), and remove the roof wire harness (B) from the A-pillar by detaching the harness

clips (C).

7. Disconnect the moonroof subharness connector (A), and detach the harness clip (B) as shown.

8. Lower the headliner (A).

-1 Remove the front door opening seals (B) and rear door opening seals (C) from each roof portion.

With the help of an assistant, detach the rear clips (D) by pulling the rear portion of the headliner down.

-3 Detach the front clips (E), the magnet (F), and the Velcro fasteners (G) by pulling the headliner down at the moonroof opening.

Headliner|Service and Repair|Page 7687 > < Headliner|Service and Repair