TL FWD V6-3.5L (2009)
Power Mirror Motor: Service and Repair
Power Mirror Actuator Replacement
Removal
1. Remove the these items:
-
Mirror holder See: Service and Repair/Mirror Holder Replacement
-
Power mirror See: Service and Repair/Power Mirror Replacement
-
Side turn signal light See: Lighting and Horns/Turn Signals/Turn Signal Lamp/Service and Repair/Side Turn Signal Light Replacement
2. Disconnect the power mirror 16P connector from the door harness.
3. Remove the gaskets (A), then remove the screw and cord from the mirror bracket (B).
4. Record the terminal location and wire colors, then cut the mirror actuator wires with the wire cutter.
5. Remove the cover (A).
6. Remove the three screws, separate the mirror bracket (B), then remove screw, separate the seal (C) from the housing (D).
7. Remove the two screws then remove the visor (A) and the actuator housing (B) from the housing (C).