TL FWD V6-3.5L (2009)
Power Seat Motor: Testing and Inspection
Power Lumbar Support Motor Test
Power Lumbar Support Motor Test
1. Remove the front seat-back cover, and seat-back cover/pad. See: Seat Cover/Service and Repair/Front Seat-Back Cover Replacement
2. Disconnect the 2P connector (A) from the lumbar support motor (B).
3. Test the motor by applying battery power and body ground to the terminals.
4. If the motor does not run or fails to run smoothly, replace it. See: Service and Repair/Front Seat Lumbar Support Replacement
