TL FWD V6-35L (2009): Cooling System Coolant Specifications (Page 2346)
Coolant: Testing and Inspection
Coolant Check
1. Remove the engine compartment covers. See: Engine/Access Cover/Service and Repair
2. Check the coolant level in the coolant reservoir. Make sure it is between the MAX mark (A) and the MIN mark (B).
3. If the coolant level in the coolant reservoir is at or below the MIN mark, add coolant to bring it between the MIN and MAX marks, then inspect
the cooling system for leaks.
4. Install the engine compartment covers. See: Engine/Access Cover/Service and Repair