TL FWD V6-3.5L (2009)
14. Install the timing belt. See: Timing Components/Timing Belt/Service and Repair/Timing Belt Installation
15. Adjust the valve clearance. See: Cylinder Head Assembly/Valve Clearance/Adjustments
16. Install the EGR valve stud bolts, then install the EGR valve. See: Powertrain Management/Emission Control Systems/Exhaust Gas
Recirculation/EGR Valve/Service and Repair
17. Connect the radiator hoses.
18. Do the battery installation procedure. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
19. Fill the radiator with engine coolant, and bleed the air from the cooling system with the heater valve open. See: Cooling System/Coolant/Service
and Repair
20. Install the engine compartment covers. See: Access Cover/Service and Repair
21. Do the crankshaft position (CKP) pattern clear/CKP pattern learn procedure. See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview
Rear
1. Remove the engine compartment covers. See: Access Cover/Service and Repair
2. Relieve the fuel pressure. See: Cylinder Head Assembly/Fuel Pressure Release/Service and Repair
3. Do the battery removal procedure. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
4. Drain the engine coolant. See: Cooling System/Coolant/Testing and Inspection
5. Remove the under-hood fuse/relay box from the bracket.
6. Remove the air cleaner assembly. See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair
7. Remove the quick-connect fitting cover, then disconnect the fuel feed hose. See: Cylinder Head Assembly/Service and Repair/Removal and
Replacement/Cylinder Head Removal
8. Disconnect the heater hoses.