TL FWD V6-3.5L (2009)
Installation
1. Install the intake manifold. Tighten the mounting bolts and nuts sequentially in three steps. Always use a new intake manifold gasket.
2. Install the upper cover. Tighten the mounting bolts and nuts sequentially in three steps. Always use a new gasket.
3. Connect the PCV hose (A) and the IMT actuator connector (B).
4. Connect the throttle actuator connector (A), the EVAP canister purge valve connector (B), the water bypass hoses (C), the EVAP canister hose
(D), the brake booster vacuum hose (E), and the vacuum hose (F).
