TL FWD V6-3.5L (2009)
Camshaft Oil Seal: Service and Repair
Camshaft Oil Seal Installation - In Car
Camshaft Oil Seal Installation - In Car
Special Tools Required
-
Ball joint remover/installer 07GAF-SD40330
1. Dry the camshaft oil seal housing.
2. Apply a light coat of new engine oil to the lip of the camshaft oil seal.
3. Using the ball joint remover/installer (A), a washer (B), and a 12 x 75 x 1.25 mm bolt (C), press in the new camshaft oil seal (D) about 0.5-1.5 mm
(0.02-0.06 in.) below the surface of the cylinder head.
