TL FWD V6-3.5L (2009)
9. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
10. Start the engine, and watch the EPS indicator.
Does the EPS indicator stay on?
YES - Go to the EPS general troubleshooting information. See: Steering and Suspension/Steering/Testing and Inspection/Initial Inspection
and Diagnostic Overview
NO - Go to step 19.
11. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
12. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and watch the SH-AWD indicator.
Does the SH-AWD indicator stay on?
YES - Go to the SH-AWD system's general troubleshooting information.
NO - Go to step 19.
13. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
14. Turn the ignition switch to ON (II), and watch the TPMS indicator.
Does the TPMS indicator stay on?
YES - Go to the TPMS general troubleshooting information. See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring
System/Testing and Inspection/Initial Inspection and Diagnostic Overview
NO - Go to step 19.
15. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
16. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and watch the immobilizer indicator.
Does the immobilizer indicator stay on or flash?
YES - Go to the immobilizer system's troubleshooting; without keyless access system, See: Accessories and Optional Equipment/Antitheft
and Alarm Systems/Testing and Inspection/Symptom Related Diagnostic Procedures/Immobilizer System Symptom Troubleshooting
Information (Without Keyless Access System) with keyless access system. See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Keyless Entry/Testing and Inspection/Symptom Related Diagnostic Procedures/Keyless Access System Symptom Troubleshooting
Information
NO - Go to step 19.
17. Do the gauge self-diagnostic function. See: Instrument Panel, Gauges and Warning Indicators/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes
18. Check the gauge display.
Is B-CAN------ERROR indicated?
YES - Check for B-CAN system DTC's. See: Information Bus/Testing and Inspection/Component Tests and General
Diagnostics/Troubleshooting - B-CAN System Diagnosis Test Mode 1 and Test Mode 2 (without the HDS)
NO - Go to step 19.
19. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.