TL FWD V6-3.5L (2009)
29. Measure the voltage between DLC terminals No. 4 and No. 16.
Is there battery voltage?
YES - Go to step 30.
NO - Repair open in the wire between DLC terminal No 4 and body ground (G401).. See: Diagrams/Harness/Dashboard Wire Harness (View
Of Driver's Side) Connector And Harness Locations
30. Connect the HDS to the DLC. See: Testing and Inspection/Initial Inspection and Diagnostic Overview
31. Jump the SCS line with the HDS.
32. Disconnect PCM connector A (49P).
33. Disconnect the HDS from the DLC.
34. Connect DLC terminal No. 6 to body ground with a jumper wire.
35. Check for continuity between PCM connector terminal A48 and body ground.
Is there continuity?
YES - Go to step 36.
NO - Repair open in the wire between the PCM (A48) and DLC terminal No. 6.