TL FWD V6-3.5L (2009)
3. From the BODY ELECTRICAL menu, select UNIT INFORMATION, and then select CONNECTED UNIT listed to see if the following control
units are communicating with the HDS.
-
Driver's MICU
-
Passenger's MICU
-
Power Window Unit
-
Gauge control module
-
Immobilizer unit
-
Climate control unit
-
HandsFreeLink control unit
-
Audio unit
-
Power seat memory control unit
-
HIP (Honda Information Platform) Unit
-
Keyless access ECM
NOTE:
-
If a unit is communicating with the HDS, DETECT will be displayed.
-
If a unit is not communicating or the vehicle is not equipped, "Not Available" will be displayed.
-
The HDS only checks the status one time when BODY ELECTRICAL is selected. To recheck the status after repair, reboot the HDS.
Are all control units communicating with the HDS?
YES - Go to step 4.
NO - If any of the control units are not communicating, go to B-CAN System Diagnosis Test Mode B. See: Troubleshooting - B-CAN
System Diagnosis Test Mode B If all units are not communicating or only the driver's MICU is communicating, go to DTC U1280
troubleshooting. See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U Code Charts/U1280
4. Select the system that has the problem from the BODY ELECTRICAL menu, then select DTCs.
Are any DTCs indicated?
YES - Go to step 5.
NO - If the problem is related to one of the following items and the system that is malfunctioning does not stop or turn off, go to B-CAN
System Diagnosis Test Mode C. See: Troubleshooting - B-CAN System Diagnosis Test Mode C If the problem is related to one of the
following items and the system that is malfunctioning does not run or turn on, go to B-CAN System Diagnosis Test Mode D. See:
Troubleshooting - B-CAN System Diagnosis Test Mode D
-
Exterior lights
-
Turn signals
