TL FWD V6-3.5L (2009)
Seats With Side Airbags
Seats with side airbags have a "SIDE AIRBAG" label on the seat-back.
-
Clean the seats with a damp cloth. Do not soak the seats with liquid. Do not spray steam on the seats.
-
Do not repair a torn or frayed seat-back cover. Replace the seat-back cover if it is damaged.
-
After a collision where the side airbag was deployed, replace the side airbag and the seat frame with new parts. If the seat-back cushion is split, it
must be replaced.
-
Never put aftermarket accessories on the seats (covers, pads, seat heaters, lights, etc.).
Disconnecting System Connectors
1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode. Disconnect the negative cable from the battery,
then wait at least 3 minutes.
Driver's Airbag
2. Remove the access panel (A) from the steering wheel, then disconnect the driver's airbag 4P connector (B) from the cable reel.
Front Passenger's Airbag
3. Remove the glove box, See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Glove Box Removal/Installation
