TL FWD V6-3.5L (2009)
Seat Belt: Testing and Inspection
Seat Belt Inspection
Out of Vehicle
For front seat belt retractors with seat belt tensioners, review the SRS component locations See: Air Bag Systems/Locations and the precautions and
procedures See: Air Bag(s) Arming and Disarming/Service and Repair before doing repairs or service.
Retractor
1. Before installing the retractor, check that the seat belt can be pulled out freely.
2. Make sure that the seat belt does not lock when the retractor (A) is leaned slowly up to 15 ° from the mounted position. The seat belt should lock
when the retractor is leaned over 40 °. Do not attempt to disassemble the retractor.
3. Replace the seat belt with a new assembly if there is any abnormality. Do not disassemble any part of the seat belt for any reason.
Driver's side
Passenger's side
Rear
Rear center