TL FWD V6-3.5L (2009)
Side Curtain Airbag
7. Remove the C-pillar trim. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Interior Trim Removal/Installation -
C-Pillar Trim
8. Disconnect the SRS floor wire harness 2P connector (A) from the side curtain airbag.
Seat Belt Tensioner
9. Remove the B-pillar lower trim. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Interior Trim
Removal/Installation - B-Pillar Upper/Lower Trim
10. Disconnect the SRS floor wire harness 4P connector (A) from the seat belt tensioner. Pull the seat belt out all the way and cut it.
11. Cut off each connector, and strip the ends of the wires. Twist each pair of unlike colored wires together, and clip an alligator clip (A) from the
deployment tool to each pair.
NOTE:
-
Place the deployment tool at least 30 ft (10 m) away from the vehicle.
-
The driver's and front passenger's airbags have dual inflators. Twist each pair of unlike colored wires together, and clip an alligator clip to each
pair.