TL FWD V6-3.5L (2009)
13. Remove the mounting bolt (A) and the alternator bracket mounting bolt (B), then remove the alternator.
Installation
1. Install the alternator, then tighten the mounting bolt (A) and the alternator bracket mounting bolt (B).
2. Install the bolt (A) securing the harness holder.
3. Install the harness clamp (B) to the alternator and connect the A/C compressor clutch connector (C) to the A/C compressor.
4. Connect the alternator connector (D) and the positive alternator cable (E) to the alternator. Make sure the crimped side of the ring terminal faces
away from the alternator when you connect it.
5. Install the drive belt. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair
