TL FWD V6-3.5L (2009)
6. Install the A/C condenser fan shroud assembly (A), then install the coolant reservoir (B).
7. Raise the vehicle on the lift.
8. Tighten the A/C condenser fan shroud mounting bolts (A).
9. Connect the A/C condenser fan motor connector (B) and install the harness clamp (C).
10. Install the splash shield. See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement
11. Lower the vehicle on the lift.
12. Do the battery terminal reconnection procedure. See: Battery/Service and Repair/Procedures
13. Install the engine compartment covers. See: Body and Frame/Access Cover/Service and Repair