TL FWD V6-3.5L (2009)
Alternator: Overhaul
Alternator Overhaul
Exploded View
Special Tools Required
-
Driver handle, 15 x 135L 07749-0010000
-
Attachment, 42 x 47 mm 07746-0010300
NOTE: Refer to the Exploded View as needed during this procedure.
Alternator Disassembly
1. Test the alternator and regulator before you remove them. See: Testing and Inspection/Component Tests and General Diagnostics/Alternator and
Regulator Circuit Troubleshooting
2. Remove the alternator. See: Removal and Replacement
3. If the front bearing needs replacing, remove the pulley locknut with a 10 mm wrench (A) and a 22 mm wrench (B). If necessary, use an impact
wrench.