TL FWD V6-3.5L (2009)
9. Connect the HDS to the data link connector (DLC) (A) located under the driver's side of the dashboard.
10. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode. Make sure the HDS communicates with the PCM.
If it does not, go to the DLC circuit troubleshooting. See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Component Tests and General Diagnostics/DLC Circuit Troubleshooting
11. Select BODY ELECTRICAL with the HDS.
12. Select ADJUSTMENT in the GAUGE MENU with the HDS.
13. Select RESET in the MAINTENANCE MINDER with the HDS.
14. Select MAINTENANCE SUB ITEM 3 RESET, and reset the ATF life with the HDS.
