TL FWD V6-3.5L (2009)
Fluid Line/Hose: Service and Repair
ATF Cooler Hose Replacement
Exploded View Without SH-AWD
NOTE: When installing the hose clamps, make sure not to interfere with the surrounding parts.
1. Install the ATF cooler hoses over the ATF cooler lines with the clips at the appropriate points in reference to the following list. Align the paint
marks (F) to the driver's side.
2. Refill the transmission with ATF to the proper level. See: Service and Repair/Removal and Replacement/ATF Replacement
